Author Topic: Does anyone have a picture of their Dickerson 37 rudder area?  (Read 926 times)

Siena

  • Deck Hand
  • *
  • Posts: 18
  • Karma: +0/-0
Hi,

Had a bit of a whoops with Siena on the way down to a race. 

I'm currently hauled out at Burr Bros in Marion, MA and the yard is looking for pictures that my rudder (damaged) is original.

I feel terrible about doing this to Siena, want to get her fixed up proper.  The good news (if there is any) is that the wood in the skeg was totally rotten and wasn't doing much anyways.

Thanks

Peter




Crew Rest

  • Administrator
  • First Mate
  • *****
  • Posts: 219
  • Karma: +1/-0
Re: Does anyone have a picture of their Dickerson 37 rudder area?
« Reply #1 on: July 08, 2017, 09:46:19 PM »
Ahoy Peter,

Not exactly sure what you need here.  I do know that Ken B. had a replacement rudder fabricated for D37 "Morning Light".  Would a connection there assist?

Al Sampson

  • Sailor
  • **
  • Posts: 69
  • Karma: +0/-0
Re: Does anyone have a picture of their Dickerson 37 rudder area?
« Reply #2 on: July 22, 2017, 11:58:50 AM »
Just a FYI, I provided Peter with a copy of the original rudder, etc. drawings a couple of weeks ago.

Al Sampson/Wanderlust


Al Sampson

  • Sailor
  • **
  • Posts: 69
  • Karma: +0/-0
Re: Does anyone have a picture of their Dickerson 37 rudder area?
« Reply #3 on: August 04, 2017, 06:29:08 PM »
It will be nice to know when the repairs are complete!

Al Sampson/Wanderlust

Siena

  • Deck Hand
  • *
  • Posts: 18
  • Karma: +0/-0
Re: Does anyone have a picture of their Dickerson 37 rudder area?
« Reply #4 on: February 10, 2018, 06:06:35 PM »
Sorry about lack of response.

Boat was finished in August by Burr Bros.  They did a great job although it seemed to take forever.

One thing we discovered was the rudder was not symmetrical.  I can't imagine this was designed this way and have to think it may have been refaired at some point.  I had noticed this while bottom painting but didn't give it much thought.  Burr sent off my rudder to a company in florida I think Foss Foam?  They made the new one and did a good job.

The other major damage:

Quadrant was snapped, they had to cut an access panel in cockpit.  But they made it removable with cleats and lightly caulked it back down in case I need to access
Rudder bearings were replaced (whew)
New skeg fabricated by Burr
New cables, and binnacle refastened
Tabbing that was broken loose was redone

Bilge sump was a poor design.  Any water that leaked down through holes from bilge pumps had soaked the foam in keel.  They cut back keel and excavated the black rotten foam.  Keel fiberglass was very stout, probably 1" thick.  This was redone. 

The bilge sump I had them redesign with a tray that was glassed in after new foam poured in cavity.  I had them attach mounting pads for bilge pumps and switches so that there would be no screw holes down into foam.  I guess at some point water will find it's way in there but trying to keep at bay as long as possible.

Can't seem to find any progress pics from visiting the yard but thought they did a great job.

Al Sampson

  • Sailor
  • **
  • Posts: 69
  • Karma: +0/-0
Re: Does anyone have a picture of their Dickerson 37 rudder area?
« Reply #5 on: March 10, 2018, 08:44:37 AM »
Yes, I have photos.

Call ma at 401.727.1555 or e-mail wanderlust_bristol@yahoo.com

Al Sampson