[Rick Woytowich]

We had someone look at the Dickerson yard for the mold for a seahood for us. We were told it was gone.
I made my own. I got insulation foam (no foil) and built it up so it was thick enough, wider, longer than needed. Then I carved it to the shape I wanted, covered it with fiberglass to the thickness I thought it should be. When cured I cut as much of the foam out with a knife then power washed the rest of the foam out.
I used regular boat caulking and screws to attach it to the boat. I want to be able to remove it, if necessary.
Then we got the frame and dodger put on Belle.
Rick

[Author]

Posts